View CPC1035N1_4699537.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CPC1035N
4-Pin SOP OptoMOS(R) Relay
Parameter Blocking Voltage Load Current Max On-resistance
Rating 350 100 35
Units VP mA
Features * Small 4-Pin SOP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 1500Vrms Input/Output Isolation * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Tape & Reel Version Available
Description The CPC1035N is a miniature 1-Form-A solid state relay in a 4-Pin SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input/output isolation. The efficient MOSFET switches and photovoltaic die use Clare's patented OptoMOS architecture. The optically coupled output is controlled by a highly efficient GaAlAs infrared LED. The CPC1035N uses Clare's state of the art double-molded vertical construction packaging to produce one of the world's smallest relays. The CPC1035N offers board space savings of at least 20% over the competitor's larger 4-Pin SOP relay. Approvals * UL Recognized Component: File # E76270 * EN/IEC 60950-1 Compliant * CSA Certified Component: Certificate # 1172007
Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls
Ordering Information
Part # CPC1035N CPC1035NTR Description 4-Pin SOP (100/tube) 4-Pin SOP (2000/reel)
* For other packaging options consult factory.
Pin Configuration
1 4
+ Control
Load
- Control
2
3
Load
Switching Characteristics of Normally Open (Form A) Devices
Control
ILOAD
+ 90% 10%+ tOFF tON
Pb
RoHS
2002/95/EC
e3
www.clare.com 1
DS-CPC1035N-R11
CPC1035N
Absolute Maximum Ratings (@ 25C)
Parameter Blocking Voltage Reverse Input Voltage Input control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Isolation voltage, Input to Output Operational Temperature Storage Temperature
1
Ratings 350 5 50 1 70 400 1500 -40 to +85 -40 to +125
Units VP V mA A mW mW Vrms C C
Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied.
Derate Linearly 3.33 mw / C
Electrical Characteristics
Parameter Output Characteristics @ 25C Load Current Continuous 1 Peak On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25C Input Control Current 3 Input Dropout Current Input Voltage Drop Reverse Input Current Input to Output Characteristics @ 25C Capacitance Input to Output
1 2 3
Conditions
Symbol
Min
Typ
Max
Units
t=10ms IL=100mA VL=350V IF=5mA, VL=10V 50V; f=1MHz IL=100mA IF=5mA VR=5V -
IL ILPK RON ILEAK tON tOFF COUT IF IF VF IR -
0.3 0.9 -
30 25 0.8 0.7 1.2 1
100 350 35 1 2 1 2 1.4 10 -
mA A
ms pF mA mA V A pF
Load current derates linearly from 100mA @ 25oC to 70mA @85oC. Measurement taken within 1 second of on time. For applications requiring high temperature operation (greater than 60oC) an LED drive current of 4mA is recommended.
2
www.clare.com
R11
CPC1035N
PERFORMANCE DATA*
CPC1035N Typical LED Forward Voltage Drop (TA=25C, IF=5mA)
35 30 Device Count (N) Device Count (N) 25 20 15 10 5 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) 0 26 27 28 29 30 On-Resistance () 31 32
35 30 Device Count (N) 25 20 15 10 5 0
CPC1035N Typical On-Resistance Distribution (TA=25C, IL=100mA, IF=2mA)
35 30 25 20 15 10 5 0
CPC1035N Typical Blocking Voltage Distribution (TA=25C)
377.5 388.5 399.5 410.5 421.5 432.5 443.5 Blocking Voltage (VP)
25 20 15 10 5 0
CPC1035N Typical IF for Switch Operation (TA=25C, IL=100mA)
25 20 15 10 5 0 0.55 0.60 0.65 0.70 0.75 0.80 LED Current (mA) 0.85
CPC1035N Typical IF for Switch Dropout (TA=25C, IL=100mA)
25 20 15 10 5 0
CPC1035N Typical Turn-On Time (TA=25C, IL=100mA, IF=5mA)
Device Count (N)
Device Count (N)
Device Count (N)
0.55
0.60
0.65 0.70 0.75 0.80 LED Current (mA)
0.85
0.50
0.60
0.70 0.80 0.90 Turn-On (ms)
1.00
1.10
25 20 15 10 5 0
CPC1035N Typical Turn-Off Time (TA=25C, IL=100mA, IF=5mA)
Load Current (mA)
CPC1035N Typical Load Current vs. Temperature
180 160 140 120 100 80 60 40 20 0 Leakage (A) 0.016 0.014 0.012 0.010 0.008 0.006 0.004 0.002 -40 -20 0 20 40 60 80 100 120 0 -40
CPC1035N Typical Leakage vs. Temperature Measured Across Pins 3 & 4 (VL=350V)
Device Count (N)
I F =10mA I F =5mA
0.21
0.22
0.23
0.24
0.25
0.26
0.27
-20
0
Turn-Off (ms)
Temperature (C)
20 40 60 Temperature (C)
80
100
CPC1035N Typical Blocking Voltage vs. Temperature
430 Blocking Voltage (VP) 425 Turn-On (ms) 420 415 410 405 400 395 -40 -20 0 20 40 60 Temperature (C) 80 100 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 -40
CPC1035N Typical Turn-On vs. Temperature (IL=50mA)
I F = 5mA
I F = 10mA -20 0 20 40 60 80 100 Temperature (C)
1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -40
CPC1035N Typical Turn-Off vs. Temperature (IL=50mA)
Turn-Off (ms)
I F = 10mA
I F = 5mA -20 0 20 40 60 80 100
Temperature (C)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department.
R11
www.clare.com
3
CPC1035N
PERFORMANCE DATA*
CPC1035N Typical LED Forward Voltage Drop vs. Temperature
LED Forward Voltage Drop (V) 1.8 1.6 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 Temperature (C) 100 120 Turn-On (ms)
I F = 50mA I F = 30mA I F = 20mA I F = 10mA I F = 5mA
2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0
CPC1035N Typical Turn-On vs. LED Forward Current (IL=100mA)
1.4 1.2 Turn-Off (ms) 1.0 0.8 0.6 0.4 0.2 0
CPC1035N Typical Turn-Off vs. LED Forward Current (IL=100mA)
0
5
10 15 20 25 30 35 40 LED Forward Current (mA)
45
50
0
5
10
15
20
25
30
35
40
45
50
LED Forward Current (mA)
60 50 On-Resistance () 40 30 20 10 0
CPC1035N Typical On-Resistance vs. Temperature (IL=50mA, IF=10mA)
3.0 2.5 LED Current (mA) 2.0 1.5 1.0 0.5 0
CPC1035N Typical IF for Switch Operation vs. Temperature (IL=50mA)
3.0 2.5 LED Current (mA) 2.0 1.5 1.0 0.5 0
CPC1035N Typical IF for Switch Dropout vs. Temperature (IL=50mA)
-40
-20
0
20
40
60
80
100
-40
-20
0
Temperature (C)
20 40 60 Temperature (C)
80
100
-40
-20
0
20
40
60
80
100
Temperature (C)
150 Load Current (mA) 100 50 0 -50
CPC1035N Typical Load Current vs. Load Voltage (TA=25C, IF=5mA)
CPC1035N Energy Rating Curve
1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 100s 1ms 10ms 100ms Time
-100 -150 -3 -2 -1 0 1 2 3 Load Voltage (V)
Load Current (A)
1s
10s
100s
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department.
4
www.clare.com
R11
CPC1035N
MANUFACTURING INFORMATION Moisture Sensitivity Clare has characterized the moisture reflow sensitivity of this package, and has determined that this component must be handled in accordance with IPC/JEDEC standard J-STD-033 moisture sensitivity level (MSL), level 3 classification. Soldering Reflow Profile For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS
4-Pin SOP Package
4.089 0.203 (0.161 0.008) 0.200 0.025 (0.008 0.001)
Pb
RoHS
2002/95/EC
e3
Recommended PCB Land Pattern
0.60 (0.0217)
3.810 0.076 (0.150 0.003) Pin 1 2.54 Typ (0.100 Typ) 2.184 Max (0.086 Max)
6.096 0.102 (0.240 0.004) 1.02 0.025 (0.040 0.001)
0.432 0.127 (0.017 0.005) 1.30 (0.0512) 2.54 (0.10)
5.60 (0.2205)
0.0254 - 0.102 (0.001 - 0.004) 0.381 TYP. (0.015 TYP.)
Dimensions mm (inches)
Tape and Reel Packaging for 4-Pin SOP Package
330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 Max (0.472 Max) B0=4.70 (0.185)
Pin 1
K0=2.70 (0.106) K1=2.30 (0.091)
Embossed Carrier
P=8.00 (0.315)
A0=6.50 (0.256) User Direction of Feed Dimensions mm (inches)
Embossment
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1035N-R11 (c)Copyright 2008, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 9/16/08
5

▲Up To Search▲

Price & Availability of CPC1035N1

	To Download CPC1035N1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .